chinese  |  English  
   
  DPL系列
  EPL系列
  EPL-H系列
  RPL-H系列
  SSP系列

艾斯勒精密齿轮(苏州)有限公司
地址:中国江苏苏州新区
滨河路625号创业大厦12#
邮编:215011
电话:+86 512 68788938
传真:+86 512 68789167
电子邮箱:
sales@eisele-gear.com
manager@eisele-gear.com
gracie@eisele-gear.com

SSP-090-005 技术资料

 
SSP 系列       70   90   120
现有的速比     No Stock
所有可以生产的速比       1-stage3,4,5,7,10
2-stage:12,16,20,25,35,40,50,70,100
for other ratios consult Eisele
额定输出扭矩(T2n) Nm(ib-in)   3:1,10:1,100:1   14(124)   40(354)   100(885)
4:1,5:1,7:1   26(230)   50(443)   120(1062)
all other ratios   36(319)   64(566)   165(1460)
最大加速度(T28) Nm(ib-in)   3:1,10:1,100:1   25(221)   60(531)   150(1328)
4:1,5:1,7:1   40(354)    80(708)   180(1593)
all other ratios   55(487)   135(1195)   255(2257)
紧急停止(T2not) Nm(ib-in)   3:1,10:1,100:1   45(398)   120(1062)   300(2655)
4:1,5:1,7:1   70(620)   150(1328)   360(3186)
all other ratios   75(664)   185(1637)   480(4248)
正常转速(n1n) RPM       3500   3000   2500
最大转速(n1max) 6000 6000 5000
空回(j) arcmin   3:1-10:1   10   10                                                                             8
12:1-100:1   15   14    12
最大径向载荷(Frad) n (lbs)       910(205)   1500(338)   3000(675)
最大轴向载荷(Faxir) n (lbs)       500(113)   1000(225)   1500(338)
扭转刚度(Ct21) Nm/arcmin(ib-inarcmin)   10:1,100:1   1.3(11.5)   3.4(30.1)   8.3(73.5)
7:1,70:1   1.7(15)   4.8(42.5)   13.6(120.4)
all other ratios   2.4(21.2)   7.1(62.8)   17.2(152.2)
重量(m) kg(ibs)   1-STAGE   2(4.4)   3.9(8.6)   8.8(19.4)
2-STAGE   2.3(5.1)   4.7(10.4)   10.9(24)
噪音(LPA) dB(A)       64   66   68
转动惯量(J1) kg cm2(ib-in2)   3:1   0.176(0.06)   0.542(0.184)   2.54(0.864)
4:1,12:1,16:1   0.173(0.059)   0.473(0.161)   1.86(0.632)
5:1,7:1,20:1,25:1,35:1   0.156(0.053)   0.407(0.138)   1.51(0.513)
all other ratios   0.137(0.047)   0.328(0.112)   1.07(0.364)
负载效率   1-stage:92% 2-stage:90%
平均寿命   20,000hours
润滑   Food Grade Greaes:
  Note 1.Meets FDA 21 CFR 178.3570 requirements
  Note 2.USDA H1 authorized(authorized for use in tederally inspected meat and poultry plnts
防护等级   IP 65
运行温度   -20 to 90
1)负载作用于输出轴的中心

返回上一页

©2007 The Company, Inc. All rights reserved.