1, when the oil temperature is more than 80℃ at work, the oil pool is more than 100℃, it needs to stop for inspection. If it is found that there is noise, it needs to eliminate the cause of the failure.
2, before oil change, it is necessary to make sure that the equipment is cooled for a period of time, and there is a certain warmth in addition. If the viscosity of the oil is completely cooled, it will increase. It is also necessary to pay attention to the need to disconnect the power supply when rerefueling.
3. The oil needs to be changed after 200-300 hours of equipment operation, which is the time for the first oil change; After 5,000 hours of use or a year, you need to replace the oil. If the equipment is out of service for a certain period of time, you need to replace the oil whether or not it is time to replace the oil.
4, the oil leakage is mainly caused by the increase of pressure. The reducer shaft head is designed with an oil seal ring, or the reducer cover is located at the shaft head with a semicircular groove, so that the oil splintered on the upper cover flows to the lower box along the two ends of the semicircular groove.